Solid Tungsten Carbide CNC End Mill Bits for Steel Four Flute Coated
Description
When CNC Machining choosing the right end mill plays a pivotal role in the time, quality, and accuracy of the finished part. We have learned from experience that investing early in high quality mills is a must for any serious machining work. In most cases paying a bit more for high quality end mills in the long run will save money. A premium cnc end mill not only allows you to machine quicker, but we have found they can also withstand much more abuse, therefore less likely to break when something goes wrong.
Our range of end mills cover all general machining applications. We wanted to supply premium cnc end mills at an affordable price, therefore we spent a lot of time going through suppliers until we found one we was happy with.
S600 series end mills for stainless steel / titanium alloy or other materials, adopt imported high-quality Fine grain tungsten steel material, with bending strength of 4300mpa and grain size of 0.4μm. It is coated with imported composite coating specially for stainless steel. It is suitable for large feed machining and improves Processing efficiency. With high precision quality control, and full inspection, all our S600 series are delivered with 100% qualification rate, suitable for various grades of stainless steel (308,316,316L) and high temperature alloy (nickel, titanium) and other intractable materials.
| Raw Material | GU25UF |
| WC | 88% |
| Co | 12% |
| TRS | >4300N/mm2 |
| Hardness | >92HRA |
| Cutting diameter | 1-20mm |
| A.O.L | 50-150mm |
| Grain size | 0.4μm |
| Helix angle | 35° |
| Upto | <HRC65 |
| Flutes No | 4F |
| Coating | Yes |
| Suitable for | Steel,stainless steel,nickel alloy,Titanium alloy,cast iron,plastic and other materials |
Standard Sizes
| Size | Flute Length of End Mills(mm) |
| Flat end | Ball Nose | Round nose |
| D1*D4*50 | 3 | 2 | 3 |
| D1.5*D4*50 | 4 | 3 | 4 |
| D2*D4*50 | 5 | 4 | 5 |
| D2.5*D4*50 | 6 | 5 | 6 |
| D3*D4*50 | 8 | 6 | 8 |
| D3*D3*50 | 8 | 6 | 8 |
| D3.5*D4*50 | 9 | 7 | 9 |
| D4*D4*50 | 10 | 8 | 10 |
| D1*D6*50 | 3 | 2 | 3 |
| D1.5*D6*50 | 4 | 3 | 4 |
| D2*D6*50 | 5 | 4 | 5 |
| D2.5*D6*50 | 6 | 5 | 6 |
| D3*D6*50 | 8 | 6 | 8 |
| D3.5*D6*50 | 9 | 7 | 9 |
| D4*D6*50 | 10 | 8 | 10 |
| D6*D6*50 | 13 | 10 | 13 |
| D6*D6*50 | 15 | 12 | 15 |
| D7*D8*60 | 17 | 14 | 17 |
| D8*D8*60 | 20 | 16 | 20 |
| D10*75 | 25 | 20 | 25 |
| D12*75 | 30 | 24 | 30 |
| D14*100 | 45 | 28 | 35 |
| D16*100 | 45 | 32 | 40 |
| D18*100 | 45 | 36 | 40 |
| D20*100 | 45 | 40 | 40 |
| Flute Length of Extended End Mills(mm) |
| D3*D4*75 | 12 | 6 | 12 |
| D4*D4*75 | 16 | 8 | 14 |
| D5*D6*75 | 18 | 10 | 15 |
| D6*D6*75 | 24 | 12 | 20 |
| D8*75 | 25 | 16 | 25 |
| D3*D4*100 | 12 | 6 | 15 |
| D4*D4*100 | 20 | 8 | 15 |
| D5*D6*100 | 20 | 10 | 20 |
| D6*D6*100 | 30 | 12 | 25 |
| D8*D8*100 | 35 | 16 | 30 |
| D10*100 | 40 | 20 | 30 |
| D12*100 | 45 | 24 | 35 |
| D6*D6*150 | 45 | 12 | 40 |
| D8*D8*150 | 50 | 16 | 45 |
| D10*150 | 55 | 20 | 50 |
| D12*150 | 55 | 24 | 55 |
| D14*150 | 60 | 28 | 60 |
| D16*150 | 70 | 32 | 65 |
| D18*150 | 70 | 36 | 70 |
| D20*150 | 70 | 40 | 70 |
Product Tags:
|
|
Solid Tungsten Carbide CNC End Mill Bits for Steel Four Flute Coated Images
|
